The List Below Gives Full Details Of Full SCART Implementation,
RGB, Composite Video And Stereo Audio
SCART Pin Connections
RGB
15. Red Out, 0.7V p-p, 75 Ohms
13. Red Return, 0 Volts
11. Green Out, 0.7V p-p, 75 Ohms
09. Green Return, 0 Volts
07. Blue Out, 0.7V p-p, 75 Ohms
05. Blue Return, 0 Volts
16. RGB Switch
18. RGB Switch 0 Volts (Pin 16 Return)
Composite Video
19. Composite Video - Out
20. Composite Video - In
17. Composite Video Common, 0 Volts
Stereo Audio
01. RH Audio - Out
03. LH Audio - Out
02. RH Audio - In
06. LH Audio - In
04. Audio Common, 0 Volts
Function Select
08. Function Switch Out / 16:9 Switching
21. 0 Volts (General Return)
Not Connected
10. NC
12. NC
14. NC
Avoiding Picture And Sound Bleed
With the use of some scart leads with some equipment you may experience picture
bleed. This can be noticed when seeing a ghost image.
This is caused by some televisions and a couple of VCR's ability to output from
their TV tuners via their scart sockets an output even while you are playing
back a tape.
To avoid this make scart leads that only have the wires to allow a single
direction flow e.g. from your VCR to your TV.
To accomplish this make leads with only the following pins connected.
